首页 > 新闻资讯 > 公司新闻 >

低氮燃烧器的技术性能

时间:2018-07-20 10:57    作者:admin 返回列表

1、单段火、两段火、两段火渐进式/比例调节
1. Progressive/proportional adjustment for single fire, two fire and two fire

2、低氮燃烧器能适应任何类型的燃烧室。
2. The low-nitrogen burner can adapt to any type of combustion chamber.

3、空气和燃气在燃烧头混合。
3. Air and gas are mixed in the combustion head.

低氮燃烧器

4、低氮燃烧器通过调节燃烧空气和燃烧头,可以获得最佳的燃烧参数。
4. The low-nitrogen burner can obtain the best combustion parameters by adjusting the combustion air and combustion head.

5、无须把燃烧器从锅炉上拆下,就可直接取下混合装置,从而可以方便的进行维修保养。
5. Without removing the burner from the boiler, the mixing device can be directly removed to facilitate maintenance.

6、低氮燃烧器采用伺服电动机来进行第一、二段空气流量调节,并且当燃烧器停止运行时,风门关闭以减少炉内热量损失。
6. The low-nitrogen burner adopts servo motor to adjust the air flow in the first and second sections, and when the burner stops running, the damper is closed to reduce the heat loss in the furnace.

7、可以给阀组加一个阀的密封控制装置。
7. A valve seal control device can be added to the valve set.

8、低氮燃烧器采用一个法兰和一个绝缘密封圈与锅炉连接固定;配有一个4孔和7孔联接器。
8. The low-nitrogen burner is fixed with a flange and an insulating seal ring. Equipped with a 4-hole and 7-hole connector.

9、低氮燃烧器根据要求可提供大于标准长度的鼓风管。
9. The low-nitrogen burner can provide a blast pipe greater than the standard length as required.


上一篇:低氮燃烧器改造后之炉渣含碳量升高的治理方案 下一篇:低氮燃烧器六大部件

Copyright © 2018 北京众诚永源节能环保技术有限公司 专注于低氮燃烧器设计、改造、销售和安装。网站地图   备案号:京ICP备10001485号-1

北京网站建设蓝杉互动